5. BMS control:
• It indicates that the BMS is controlling the charge voltage setpoint (and not using the value set for absorption and float in
the Multi/Quattro or solar charger).
8.3. Customise the logo on the Boat & Motorhome page
It is possible to use a custom logo on the Boat & Motorhome page.
Type the following address into the web browser of a device connected to the same network, using this address as a
template: http://venus.local/logo.php or http://[ip-here]/logo.php (inserting your device’s IP address between the square brackets).
The IP address can be found by going to Settings → Ethernet or WiFi. Once the page is loaded, choose an image file from your
device. Reboot the GX device.
Color Control GX Manual
Page 47 Configuration
To Next Page
Loading...
