PGN Description
J1939 AC PGNs
13.4.9. Troubleshooting
Q1: The MFD page shows outdated information or shows the connection issue page, but the GX device is running and connected
and the Victron icon is present on the home page.
A1: Try reloading the page by pressing the menu on the top right corner and select HOME.
13.5. Garmin MFD Integration
13.5.1. Introduction
This chapter explains how to connect to Garmin MFDs using an Ethernet connection. The integration technology used is
called Garmin OneHelm.
Make sure to also study the Marine MFD Integration by App [73] chapter.
Note that there is an alternative method to connect, which is NMEA2000. See the NMEA2000 chapter in the main manual.
13.5.2. Compatibility
OneHelm is currently available for the following models:
• GPSMAP® 8400/8600 MFD series
• GPSMAP® 722/922/1222 Plus MFD series
ActiveCaptain is also supported. The screenshot below shows ActiveCaptain with the Victron App.
From Victron side, all GX devices (Cerbo GX, Color Control GX, Venus GX, and so forth) can be used and are compatible. For
details on detailed product compatibility with regarding to inverter/chargers and other components, see the main Marine MFD
Integration by App [73] chapter.
13.5.3. Wiring
The Garmin MFD needs to be connected to the GX deviceusing Ethernet. Its not possible to connect over WiFi. For the Ethernet
connection, a Garmin adapter is required:
Color Control GX Manual
Page 80 Marine MFD integration by App
To Next Page
Loading...
