BEFORE USING YOUR NEW GRILL FOR THE
FIRST TIME
Before using your new grill for the first time, it is necessary to "season" it. Remove the cooking
grate(s) and the water pan from the right side of the grill and wash them in mild soap and water.
Replace water pan and grate(s) and add water, approximately 1/2 inch deep, to the water pan. Light
all the burners, close the lid and operate the grill for 20 minutes or so on high heat or until grill
reaches 500°.. Turn off the grill and allow the grill to completely cool with lid closed. Be sure to check
all the gas fittings and connections each time you use a gas-fired grill to be sure there are no
leaks and make sure hoses are not touching bottom of grill. See Example A.
IMPORTANT!
DO NOT ALLOW THE REGULATOR HOSE TO COME
IN CONTACT WITH THE BOTTOM OF THE GRILL.
INCORRECT
CORRECT
00
NO!
CAUTION: Check all hoses and
connections before lighting grill for the
first time.
7
To Next Page
Loading...