EasyManuals Logo

Vidao V7TAB8KB User Manual

Default Icon
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
!
^!
be transferred to a microSD card from your personal computer and then
imported into your Tablet.
o To install the microSD card
o Insert the microSD card, making sure the gold contacts are
facing down.
o Push the microSD card in gently into the slot (2) until it locks
into place.
o To remove the microSD card
o Push in gently on the microSD card and it will pop out slightly
from the slot. Pull the card out of the slot. (2)
o Warning: Follow the instructions for safe removal of the
microSD card from the tablet. Improper removal of the microSD
card may cause data loss or unpredictable system issues. For
safe removal, tap > Settings > Storage >Unmount microSD
card.
1.3. Charging Battery
When you first receive your device the battery will only be partially charged.
To fully charge the battery, allow it to charge for 5 hours to ensure it’s fully
charged before using the tablet.
1. Connect one end of the AC adaptor to the power jack (6) of the device.
2. Plug the other end of the AC adaptor into a wall outlet to start charging.
3. The red LED on the front of the device will turn off when it is fully
charged.
Tips: To increase battery life
Lower the screen brightness
Reduce the time until the device enters the Sleep mode
Turn off the Wi-Fi when an Internet connection is not required
Close any applications when finished using them or they will
continually run in the background.
Turn your device completely off when finished using.
1.4. Turning the Device ON or OFF
o To turn ON your device:
o Press and hold the Power button (1) for at least 2 seconds until an
image appears on the screen.
o To turn Off your device:
1. Press and hold the Power button (1) for at least 2 seconds
2. A pop-up window will appear, tap OK to confirm power shutdown or
tap CANCEL to return to the main screen.
o To put your device into the Sleep (Power Saving) mode:
o Press & release the Power (1) button. This will turn the display off
and put the tablet into a power saving Sleep mode.
o To wake your device from the Sleep mode, press & release the
Power button (1).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vidao V7TAB8KB and is the answer not in the manual?

Vidao V7TAB8KB Specifications

General IconGeneral
BrandVidao
ModelV7TAB8KB
CategoryTablet
LanguageEnglish