Need help?Do you have a question about the ViewSat VS2000 and is the answer not in the manual?
General| Satellite | DVB-S |
|---|---|
| Tuner Type | Single |
| Ethernet Port | No |
| Supported Satellite Systems | DVB-S |
| DiSEqC | DiSEqC 1.0, 1.2 |
| Video Output | Composite |
| Audio Output | RCA (Stereo) |
Explains safety symbols indicating electrical hazards.
Details the connection of the LNB cable from the satellite dish to the receiver.
Explains methods for connecting the receiver to a television set.
Details the controls and indicators located on the front of the receiver.
Explains the various input/output ports on the back of the receiver.
Guides on automatically detecting and saving all TV and Radio channels from a satellite.
Explains how to search for channels by manually scanning a specific transponder.
Explains how to manage channels, including locking, deleting, moving, and renaming.
Details how to configure antenna-related settings like LNB, frequency, and satellite.
Guides on performing an automatic scan for channels after antenna setup.
Explains how to perform a blind scan when transponder information is unknown.
Guides on troubleshooting remote control functionality.
Details steps to diagnose and fix signal reception issues.
Explains the method of automatically searching for remote control codes.
Details how to program the remote using direct code entry.
To Next Page
