PGD-150 3D Glasses User Guide
System Requirements
The PGD-150 3D Glasses are designed to be emitter free and work with 3D enabled
DLP
®
Link projectors and televisions. The DLP projector should be in 3D mode and
displaying 3D content.
3D Glasses
Benefits
Light weight design for comfortable long-time wear
․Long effective distance (up to 15 metres) when used in conjunction with a projector
which has a brightness output of more than 2000 lumens
․Good resistance against ambient light interference
Operation Guide
․To turn on PGD-150 3D Glasses
Press the power button, the LED and LCD shutter will flash three times. The 3D
Glasses will then be in 3D mode. If you press the power button again, 3D mode will
become inverted.
․To turn off 3D Glasses
Press the power button until the LED lights up.
․Operation instruction flow chart
Optical receiver
Power button
Batter
To Next Page
Loading...