26
Picture
Color Mode
There are many factory presets optimized for various types of images.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and
notebook coloring.
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing
in a blackened (little light) environment
• ViewMatch: Switches between high brightness performance and accurate color
performance.
• User 1:Memorize user 1 defined settings.
• User 2:Memorize user 2 defined settings.
• White Board:For white projection screen type.
• Black Board:For black projection screen type.
• Green Board:For green projection screen type.
Reference Mode
Select a picture mode that best suits your need for the image quality and further fine-
tune the image. This function is only available when User 1 or User 2 is selected.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and
notebook coloring.
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing
in a blackened (little light) environment
• ViewMatch: Switches between high brightness performance and accurate color
performance.
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red Gain, Green Gain, Blue Gain) to customize user color
temperature.
User Color
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select
each color, you can independently adjust its range, hue, saturation and gain according
to your preference.
To Next Page
Loading...
