EasyManua.ls Logo

ViewSonic PX701-4K - Appendix; Specifications and Timing

ViewSonic PX701-4K
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Specifications
Item Category Specifications
PX701-4K PX728-4K PX748-4K
Projector Type DLP Lamp
Display Size 60”~200”
Brightness
(Lumens)
3,200 ANSI 2,000 ANSI 4,000 ANSI
Throw Ratio 1.50~1.65
(95”±3%@3.16m)
1.127~1.46 (95”±3% @
2.37m)
Lens 1.1x±2% Optical
Zoom
1.3x±2% Optical Zoom
Light Source
Type
UHP 203W E20.7i UHP 240W E20.7i
Display System 1-CHIP DMD
Input Signal VGA f
h
: 15K~129KHz, f
v
:48~120Hz,
Pixel rate: 170MHz
HDMI f
h
: 15K~129KHz, f
v
:23~120Hz,
Pixel rate: 170MHz
Resolution Native 3840 x 2160
Power Adapter
1
Input Voltage AC 100-240V, 50/60 Hz (auto switch)
Operating
conditions
Temperature 0°C to 40°C (32°F to 104°F)
Humidity 0% to 90% (non-condensing)
Altitude 0 to 1,499 m at 5°C to 35°C
1,500 to 3,000 m at 5°C to 25°C
Storage
conditions
Temperature -20°C to 60°C (non-condensing)
Humidity 0% to 90% (non-condensing)
Altitude 0 to 1,219 m at -20°C to 30°C
Dimensions Physical
(W x H x D)
312 x 108.37 x 221.8 mm (12.3” x 4.3” x 8.7”)
Weight Physical 3.7 kg (8.16 lbs) 2.6 kg (5.73 lbs)
Power Saving
Modes
On
2
260W (Typical)
Off < 0.5W (Standby)
1
Please use the power adapter from ViewSonic® or an authorized source only.
2
The test condition follows EEI standards.
Appendix

Table of Contents

Related product manuals