EasyManua.ls Logo

ViewSonic VA1912w-2 - Page 12

ViewSonic VA1912w-2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ViewSonic Corporation
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not be a separate save
2.7 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input connection
3.5 mm stereo jack
Line input signal 1 Vrms
Line input impedance 20k ohms
Maximum power output (Electric)
1.5W / CH
Signal to Noise Ratio 72 dB
Frequency response 300 TO 20KHZ
Distortion 8%@1kHz
Vibration
There should be no audible vibration with volume at 100%. (Input
signal within 1 Vrms)
Screen image
There should be no affect on the screen image stability under any
conditions
Connector PC99 requirement Audio in
Lime Green pantone # 577C
Cable type / length 3.5mm stereo cable / 1.8m length
Audio DPMS
NOTE: THERE IS NO GUARANTEE <1 W POWER
CONSUMPTION IN ACTIVE OFF MODE, WHEN THE AUDIO
CABLE IS CONNECTED
9
Confidential - Do Not Copy VA1912w-2_VA1912wb-2

Related product manuals