ViewSonic VFM836-54 - 3. Getting Started; 3.1 Attach the Stand; 3.2 Battery Installation

ViewSonic VFM8366
3. Getting Started
3.1 Attach a Stand
To attach the stand, screw in the stand clockwise until it is secure.
To remove the stand, unscrew the stand counter-clockwise until it is
detached.
3.2 Battery Installation
Picture 3Picture 2Picture 1
1 2
1. Place the remote control face down. Press the tab (number 1) in Picture 1
to the right and pull out the battery holder.
2. Remove the plastic insulator. (Picture 2)
3. Place the battery with the positive polarity face up on the battery holder
and insert the battery holder into the remote control (Picture 3).