ViewSonic VP171 - Setup Procedure

VP171
A1T020100001
VLCDS25972-1W
DV I - DV I C a b l e
1. Connect P2 and P4 of Fixture with VGA ports of VP171/s/b by two VGA Cables.
2. Connect P3 of Fixture with DVI port of VP171/s/b by DVI-D Cable.
3. Connect P1 of Fixture with COM1 of PC by RS232 Cable.
4. Plug Power Adapter to Fixture.
5. Connect Power Cord to VP171/s/b Monitor, and turn on the Power Switch.
6. Connect PC to the additional monitor.
P3 : to DVI-DVI
Cable
JP1 : to
Power
Adapter
P1 : to
RS232 Cable
P2 & P4 : to VGA Cables
Power Adapter for Fixture
(P/N: 47.56001.501)
VGA Port
Connect to
Power Cord
Turn on the Power Switch
DVI Port
ViewSonic Corporation
48
Confidential – Do Not Copy
VP171/b/s
Set-Up Procedure
7-2