ViewSonic VP2786-4K - PIP (Picture-in-Picture)

5757
PIP (Picture-in-Picture)
Main Window
Inset Window
To congure PIP:
1. Move the Joy Key t to display the Startup Menu. Then navigate to Main Menu
and press the l key to display the OSD Menu.
2. Move the Joy Key p or q to select Setup Menu. Then press the l key to enter
the Setup Menu menu.
3. Move the Joy Key p or q to select Multi-Picture. Then press the l key to enter
its sub-menu.
4. Move the Joy Key p or q to select PIP. Then press the l key to enter its sub-
menu.
5. To change the input source for the Inset Window, select PIP Source Select and
press the l key. Then move the Joy Key p or q to select the desired input source
and press the l key to conrm.
6. To adjust the Inset Window posion, select PIP Posion and press the l key.
 Press the l key to select PIP H.Posion or PIP V.Posion.
 Move the Joy Key p or q to adjust the seng and press the l key to
conrm.
7. To adjust the Inset Window size, select PIP Size and press the l key. Then move
the Joy Key p or q to adjust the seng.
8. To swap the two windows, select Swap and press the l key to conrm.