ViewSonic Corporation Confidential - Do Not Copy VX2235wm-1
12
2.7 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input signal 1.0 Vrms @1kHz
Line input impedance 10 kOhm
Maximum Amp power output (Watt)
2 W (RL=4Ω)
Amp -THD < 10 % THD @1kHz
Speaker Power rating(Ω/Watt)
4Ω/2.5 W (TYP.) ; 4Ω/ 3 W (MAX)
Signal to Noise Ratio 72 dB
Frequency response Fo – 20kHz
SPL. 85 ± 3 dB (at 0.5m)
FO 300 Hz
Line input connection
3.5 mm stereo jacks
Vibration
There should be no audible vibration resonance at volume=100% &
treble / bass in def. Value
Screen image
There should be no affect on the screen image stability under any
conditions
Connector PC99 requirement Audio in
Lime Green pantone # 577C
Cable type / length 3.5mm stereo cable / 1.8m length
Audio DPMS
SPEAKERS STAY ON WHEN THE REST OF THE MONITOR IS IN
POWER SAVING
NOTE: THERE IS NO GUARANTEE <1 W AT POWER
CONSUMPTION IN ACTIVE OFF MODE, WHEN THE AUDIO
CABLE IS CONNECTED
To Next Page
Loading...
