5.Connect Power Cord to VG2030 Monitor.
3.3 DDC Key In Procedure
1.Run DDC.exe
2.Choose model number and conform the Time then Press “ENTER” key.
3.When appear the PIC “ choose DDC Card”, Press ALT+2 .Enter DDC 2B test interface.
Choose DDC Card
4.Press F8 to choose corresponding model.DAT(VG2030A.DAT press“ENTER” key)
VG2030_A means the DDC under analog mode. VG2030D means the DDC under digital mode.
29
ViewSonic Corporation Confidential - Do Not Copy VG2030wm-1
To Next Page
Loading...
