ViewSonic VT2430-1M - Page 48

5.5 VGA DDC Key In Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the LCD TV, you have to do the DDC key in.
5.5.1 Equipment Needed
- VT2430-1M LCD TV
- DDC Card
- PC
- RS-232 cable
- Barcode Reader
- VGA Cable
VT2430-1M LCD TV DDC Card PC
RS-232 Cable VGA Cable Barcode Reader
5.5.2 Setup Procedure
1. Connect VGA Card and DDC Card with RS-232 cable.
ViewSonic Corporation
45
VT2430-1M
Confidential - Do Not Copy