8
INSTALL HOUSING INTO
CABINET
1. Remove cooktop.
2. Set housing into cabinet / countertop opening as far back as
possible and make sure it is level.
3. Extend SUPPORT LEGS and attach to bottom of cabinet with
(2) SCREWS through each leg. Tighten HEX NUTS.
HEX NUT
4. Extend UPPER SUPPORT BRACKETS and attached to sides
of cabinet with (2) SCREWS through each bracket.
UPPER
SUPPORT
BRACKET
1
5. Loosen (4) BOLTS attaching BLOWER SUPPORT LEGS to FLEX
BLOWER. Extend legs and secure them to bottom of cabinet
with a SCREW through each bracket.
FLEX
BLOWER
(4)
BOLTS
SCREWS
Installations using FLEX BLOWER only:
(2) SCREWS
1
SUPPORT LEGS
(2)
SCREWS
HEX NUT
To Next Page
Loading...
