22TB-IP
SIP Multicast Talk-Back
Speaker
December 18, 2018
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
2.0 Power Source
QUICK START GUIDE
VIKING
Electronics, Inc.
Select PoE Switch or PoE Injector that meets the following requirements:
1. IEEE 802.3af / 802.3at / 802.3bu compliant
2. Capable of providing at least 13 Watts (class 0 or class 3)
Note: CAT5e (or higher) cable recommended
1.3 Download and install the programming software
1. Go to www.vikingelectronics.com and enter 22TB-IP in the search box
2. Click 22TB-IP in the search results
3. Scroll down the page to Downloads, click IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP Programming.exe
5. Follow the prompts on your screen to complete software installation
K See Product Manual for complete installation and programming instructions.
1.2 Download the product manual
1. Go to www.vikingelectronics.com and
enter 22TB-IP in the search box
2. Click 22TB-IP in the search results
3. Click Product Manual to open and
download the PDF
Scan the QR code to
open and download
the product manual
- OR -
X 1
22TB-IP Speaker
X 8
Gel-Filled Butt Connectors
To Next Page
Need help?
General
