0478 670 9903 A - EN
14
Scarified material
should be composted
and not disposed of in
household waste.
The appliance, its
packaging and accessories
are all produced from
recyclable materials and must
be disposed of accordingly.
By disposing of materials
separately, and in an
environmentally-friendly
manner, valuable resources
can be re-used. For this
reason, the appliance should
be disposed of for recycling at
the end of its useful life.
Render the engine unusable
prior to disposal.
Remove the ignition lead,
empty the fuel tank and drain
the engine oil in particular.
Risk of injury caused by the
scarifying unit.
Always store an old lawn
scarifier in a safe place prior to
scrapping. Ensure that the
appliance and the blades are
kept out of the reach of
children.
13. Environmental
protection 14. Standard spare parts
Blade set
6290 007 1000
2. Observance of the
information in this
instruction manual
The VIKING appliance must be
used, maintained and stored
with the care described in this
instruction manual.
Any damage caused by non-
observance of the safety,
operating and maintenance
instructions is the sole
responsibility of the user.
This applies in particular to:
- improper use of the product
- Use of fuel and lubricants not
approved by VIKING
(lubricants, petrol and engine
oil, see engine
manufacturer’s
specifications),
- product modifications not
approved by VIKING
- use of attaching parts,
attachments or cutting tools
not approved by VIKING,
- use of the product for
sporting or competitive
events
-resultant damage due to
continued use of the product
with defective components.
3. Maintenance operations
All operations listed in the
section “Maintenance” must be
performed regularly. If this
maintenance work cannot be
performed by the user himself,
an authorised specialist dealer
must be commissioned.
VIKING recommends that you
have maintenance operations
and repairs performed
exclusively by a VIKING
specialist dealer.
VIKING specialist dealers
regularly attend training
courses and are provided with
technical information.
If these operations are
neglected, faults may arise
which are the responsibility of
the user.
These include:
- corrosive and other resultant
damage caused by incorrect
storage
- damage and resultant
damage due to the use of
spare parts which are not
original VIKING parts,
- damage due to maintenance
and repair work not
performed in the workshops
of authorised specialist
dealers
To Next Page
Loading...
