23
Adjust the slope by unlocking the lock .The hedge trimmer can be tilted from 0 ° to 90 °
5. Remove the cover from the cutter blade. The engine now may be started.
Adjusting the Hedge Trimmer Cutter Assembly for Desired Cutting Angles
WARNING!
Do not touch the cutter blades when the engine is running. The blades can oscillate even if the
engine is idling.
Safety Operation
This machine is designed especially for trimming hedge.
Never use this machine for any other purpose, Never try to cut stones, metals, plastics or any other hard
objects.
Using for other purposes than trimming hedge may damage the machine or cause serious injury.
Preparations
●Wear suitable protective clothing and equipment-see section “Safety Precautions”.
●Choose the best work position for safety against the falling object (Branch etc)
●Start the engine
●Put on the strap.
Never stand directly underneath the branch you are cutting-be wary of falling branches. Note that a
branch may spring
To Next Page
Loading...