8. Place hopper adapter (#4) into hole at top of body. Place plastic hopper (#2)
on top of hopper adapter.
9. Insert handle (#18) into hole in drive shaft, being sure to line up the two
ridges in the handle with the two slots in the hole. Important: Do not turn
handle when strainer is dry as it may damage the strainer. Only turn handle
when food is being processed so juices can lubricate the screen and prevent
heat build-up. Handle will turn easily when food is in spiral. Your VillaWare
Food Strainer is now ready to use!
ACACACACACACACACACA 4 CACACACACACACACACACA
For information on ordering replacement parts for your VillaWare
®
Food Strainer,
please see the chart on page 9 of this booklet.
200_booklet.qxd 5/11/04 5:33 PM Page 4
To Next Page
Loading...
