PBX Functions
Inquiry call
Only for telephones with R button.
Press R+2 during conversation ●
Dial number of desired phone ●
Call is set up when handset on remote enquired phone is lifted –
Press R+2 to toggle between the phones ●
The other conversation will be parked –
Replace handset to disconnect both phones ●
Call transfer
Only for telephones with R button.
Press R+2 during conversation ●
Dial number of desired phone ●
Call is set up when handset on remote enquired phone is lifted –
Press R+3 to transfer the call ●
Replace handset to withdraw from conversation ●
The two other phones will remain in conversation –
Call forwarding
Lift handset and dial 71 ●
Dial remote phone number you want calls forwarded to ●
Press the ● button to confirm
Replace handset ●
Own phone will ring for ca. 10 sec. when called, –
then forwarded if not answered
Dial 70 from your own phone to cancel Call forwarding ●
Follow me
Lift handset on the phone you want calls to be transferred to ●
Dial 72 ●
Dial your own phone number ●
Replace handset ●
Own phone will ring for ca. 10 sec. when called, –
then transferred to present phone if not answered
Dial 73 + own phone number to cancel Follow me ●
Busy notify
If the called station is busy, dial 57 or press the ● button to send
an attention tone (3 beeps) to the busy stations.
Call priority and busy override
Only a selected set of telephones will have option for
busy override.
If caller get busy tone, dial 58 or ● for busy override
The other call is disconnected and the priority call is set up –
To Next Page
Loading...
Need help?
General