QT-C 040714
Page 10 | 1-800-343-9463
SYSTEM OPERATION ADVANCED QT
Condensate Evaporator Switch
The QT’s condensate evaporator is a heating element that evaporates excess condensate that accumulates in the cooling system as
a byproduct of refrigeration.
— “On”: Turning the condensate evaporator on causes the heating element to remain heated in order to evaporate excess
condensation.
— “O”: If your wine cellar is located in a dry climate, there is a good chance that the unit will not accumulate excessive water. Save
electricity by switching the condensate evaporator to the “O” position.
Temperature Equalizer
The temperature equalizer switch controls the fan, which is mounted on top of the evaporator plate. It is designed to keep air
moving throughout the cabinet in order to maintain consistent temperature between its upper and lower half.
— “Auto”: During normal operation, set the switch to the “Auto” position. The fan will operate whenever the cooling system is
running.
— “Continuous”: This feature runs the fan continuously.
—“O ”: Shuts o the fan for noise reduction.
Do not become overly concerned about air temperature variations. Remember, the unit measures liquid temperature, not air
temperature. The unit will operate when the liquid temperature varies.
CREDENZA STYLE CONTROLLER
REGULAR QT CONTROL BOX
MANUAL
DEFROST
SCROLL
DOWN
POWER
ON
OFF
SET
SCROLL
DOWN
SCROLL
UP
POWER
ON
OFF
ON
OFF
ON
OFF
AUTO
OFF
CONT.
SET
To Next Page
Loading...