Vinotheque QT - Page 21

www.whisperkool.com | Page 19
TROUBLESHOOTING CONT.
door adjust.allen wrench
Door Realignment
(for Back Vented Villa Cabinets)
The door can be adjusted by loosening the three Allen head
bolts (easier done from the outside), securing the top and
bottom pivot hinges through slotted mounting holes, and
moving the hinge(s) in the appropriate direction. Re-tighten
the bolts after the adjustment is completed and only after
checking the level of the cabinet.
Door Realignment
(for NS Door Hinge Style)
1. Remove the (2) black Set Screws.
2. Loosen the (2) steel Adjustment Screws and adjust the door by sliding hinge.
Note: If the Adjustment Screws need to be relocated we recommend to always have one Adjustment Screw securing
the door to the cabinet at all times. Vinotheque recommends to ll the screw holes when relocating them.
3. Once the door is in the desired location tighten the (2) Adjustment Screw.
4. Re-install the (2) black Set Screws after the adjustment is completed and only after checking the level of the
cabinet.