Need help?Do you have a question about the Vintage Air 11300-VUZ-A and is the answer not in the manual?
General| Evaporator Finish | Black |
|---|---|
| Compressor Included | No |
| Voltage | 12 V |
| Refrigerant | R134a |
| Evaporator Case Material | ABS Plastic |
Recommends purchasing specific heater hose for maximum performance.
Details the function and importance of compressor safety switches in A/C systems.
Provides crucial service info on system evacuation, charging, and refrigerant type.
Factors influencing AC installation like vehicle type and equipment used.
Guidance on locating the evaporator unit based on space and hose routing.
Instructions for checking, sealing firewall holes and insulating the cabin.
Steps for attaching evaporator brackets and the drain hose to the unit and firewall.
Procedures for positioning the evaporator and drilling mounting holes in the dash.
Details on securing the evaporator using front and rear mounting brackets.
Guiding hose placement through the firewall and initial routing.
Instructions for mounting the drier and connecting hoses with fittings.
Advice on hose crimping and final connection of hoses to the evaporator and expansion valve.
Detailed instructions on lubricating and installing O-rings and fittings onto hoses.
Steps for making electrical and vacuum connections according to the diagram.
Explains critical wiring like the 12GA wire, relays, and safety precautions.
Instructions for routing heater hoses and installing the control valve.
Guidelines for filling coolant, testing the system, and checking the heater control valve.
Explains how the thermostat controls coil temperature and settings.
Provides solutions for symptoms like poor cooling, frequent clutch cycling, or no cooling.
Guides on checking the heater control valve for correct installation and operation.
To Next Page
