19
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 3
Tools and Materials
General
1 The following tools and consumable materials will be required for servicing, disassembly, repair,
assembly and adjustment.
Tools
Consumable materials
ITEM PART No. PROCEDURE
Spring insertion tool T39827 Platform slide release spring
Guide pin ejection tool T39300, Balance mechanism guide pin removal
Shim setting tool T61463 Setting shim pack thickness
Spot face tool 3321-912SP Refurbishment of serrations on tilt drag housing or RH side plate
using 3364-907SP
NOTE: Adhesives and lubricants are not supplied by Vinten Broadcast Ltd and should be
obtained under local arrangements
ITEM PART No. USE
Loctite 222E Z002-075 Thread locking
Loctite 241 Z002-022 Grub screw retaining balance unit guide pin
Loctite 270 Z002-034 Balance mechanism assembly
Loctite 380 Z002-078 Platform slide
Loctite 406 Z002-086 Drag knob sleeves
Loctite 415 Z002-062 Pan brake cup, level bubble illumination graphic
Loctite 601 Z002-020 Adhesive
Loctite 638 Z002-058 Pan drag knob shaft, balance adjustment knob
Loctite 641 Z002-074 Tilt bearing installation
Loctite Primer 757 Z002-087 Primer for Loctite 406
3M VHB Surface cleaner, or locally
available equivalent
Z004-029 Cleaning friction rings and friction faces in drag
assemblies
Gasket sealant, blue Hylomar Z100-025 Spherical base stud carrier
To Next Page
Loading...