Vinten Vision SD12 - Page 55

55
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.4 Vision SD12 Pan and Tilt Head - Tilt Assembly
Item Part No. Nomenclature Qty
1 3364-922SP* Tilt drag housing assembly 1
2 3364-313 Tilt drag actuator shaft 1
3 3364-306 Thrust washer 1
4 Thrust bearing, comprising:
P602-027 Washer, thrust, bearing, 17 mm ID x 30 mm OD x 1 mm thick 2
P602-026 Bearing, needle roller, thrust, 17 mm ID x 30 mm OD x 2 mm
long, with cage assembly
1
5 3364-27 Friction plate assembly 1
6 M806-001* Pin, coiled-spring, 3 mm dia. x 12 mm long, hcp 3
7 3364-44 Labyrinth unit assembly 1
8 3364-46* Constant drag unit assembly - tilt 1
9 M004-711* Screw, cap head, socket, M3 x 20 mm long 6
10 M806-015* Pin, coiled-spring, 3 mm dia. x 8 mm long, hdp 2
11 3364-251 Brake disc - tilt 1
12 3364-220 Brake clamp - tilt 1
13 M004-716 Screw, cap head, socket, M3 x 18 mm long 2
14 3364-917SP* Outrigger assembly (spares) 1
15 M005-708* Screw, cap head, socket, M4 x 25 mm long 4
16 3364-324* Pan brake shaft 1
17 3364-206* Brake knob 2
18 M004-103* Screw, countersunk head, pozidrive, M3 x 8 mm long 2
19 3364-343* Brake knob cap 2
20 3364-352* Spring element 2
21 3364-351* Friction insert 2
22 3364-244* Tilt brake shaft 1
23 3364-256* Tilt brake insert 1
24 M004-906* Screw, countersunk head, socket, M3 x 6 mm long 6
25 M806-005* Pin, coiled-spring, 4 mm dia. x 12 mm long, hdp 4
26 3364-312 Tilt drag shaft 1
27 P200-106* Bearing, ball, radial, 35 mm ID x 47 mm OD x 7 mm long, two
shields
1
28 3364-300* Spacer 1