Vinten Vision SD12 - Page 62

62
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.7 Vision SD12 Pan and Tilt Head - Pan Bar
Item Part No. Nomenclature Qty
3219-52 Telescopic pan bar unit (Vision 12SD), comprising
1 M606-001 Washer, nylon spacer, 5.3 mm ID x 18 mm OD x 3.8 mm thick 1
2 M006-113 Screw, countersunk head, pozidrive, M5 x 12 mm long 1
3219-51 Pan bar clamp assembly (Vision 12SD), consisting of: 1
3 3219-298 Pan bar clamp (Vision TF) 1
4 L701-004 Circlip, external, standard, 0.312 in. shaft dia. x 0.025 in. thick 1
5 3219-303 Clamp shaft [similar to 3219-226] 1
6 G249-007 Sleeve, insulation, head diameter 18 mm, body diameter 10.9
mm
1
7 M600-009 Washer, plain, heavy, M8 1
8 Q001-010 'O'-Ring, 1/4 in. nominal ID x 0.070 in. section, hardness 70
IRHD
1
9 3219-270 Pan bar clamp knob (Vision 12SD) 1
10 M004-703* Screw, cap head, socket, M3 x 8 mm long 1
11 3364-343 Brake knob cap 1
3219-36 Telescopic pan bar assembly, consisting of: 1
3219-38 Telescopic pan bar sliding, consisting of:
12 3219-299 Pan bar clamp (M6) 1
13 M500-082 Nut, M6, standard (hex), full 1
14 3219-267 Clamp lining (telescopic pan bar) 1
15 3219-49 Outer tube / clamp assembly 1
16 M600-007 Washer, plain, heavy, M6 1
17 K403-004 Knob, locking-key, female, M6 thread, 32 mm wide 1
18 3219-312 Pan bar sleeve 1
19 3219-253 Hand grip (telescopic pan bar) 1
20 J550-093 Plug, tube-end, to fit 1 in. tube OD 1
3219-37 Telescopic pan bar fixed, consisting of: 1
21 J550-074 Plug, tube-end, to fit 7/8 in. tube OD 1
22 3219-255 Fixed tube (telescopic pan bar) 1
23 3219-227 Pan bar sleeve 1
24 3219-229 Pan bar spigot (Vision 10) 1