Safety and handling precautions for the user Manual BG41/BG42/BG43
1-2 Rev. 99/49
1.1.2 Shipping electrostatically sensitive modules
Always use the original packaging for dispatch. The prepared building blocks could additionally be
wrapped with a conductive packaging. Conductive packaging is antistatic foil or metallozed plastic-
film containers..
A battery is to be found on the interface building block as a compensating
charge for the clock. Insure that the battery’s connections are not touched or
short-circuited, when dispatched in conductive packaging
1.1.3 Tests and modifications to electrostatically sensitive modules
The following aspects are to be observed, when measuring building blocks liable to electrostatic
danger:
•= Floating measuring equipment is to be temporarily discharged.
•= Measuring equipment to be used is to be earthed.
When altering building blocks liable to electrostatic danger, one is to ensure that an earthed
soldering iron is used.
When working with or on building blocks liable to electrostatic danger, one is
to ensure that both the people and the working material are sufficiently
earthed.
To Next Page
Loading...
