VIPA SSM-BG41 - Fig. 3-14: Allocation of Terminal Pins When Using a RS422;RS485-Moduls

Manual BG41/BG42/BG43 Interface modules
Rev. 99/49 3-15
3.2.4.2 Allocation of the RS422/RS485 module’s terminal pins
Fig. 3-14: Allocation of terminal pins when using a RS422/RS485-moduls
It is possible to obtain 24 V from pin 11 (+24 V) and pin 22 (ground), if this voltage is available in
the connected PLC.