Chapter 3 Profibus DP Manual VIPA System 300V
3-46 HB130E - IM - Rev. 08/26
Technical Data
Electrical data VIPA 353-1DP00
(DP-V0)
VIPA 353-1DP01
(DP-V0/V1)
Voltage supply DC 24V, via front from ext. power supply
Current consumption max. 1A
Current supply int. bus 3.5A
Potential separation
≥ AC 500V
Status indication Via LEDs at the front
Connections/Interfaces RS485: 9pin D-Type jack Profibus connection
Profibus interface
Connection RS485: 9pin D-Type jack
Network topology Linear bus, active bus termination at both ends, tap lines
possible.
Medium Screened and drilled Twisted Pair cable, screen may be
left, depending on environment conditions
Transfer rate 9.6kBaud up to 12MBaud (automatic adjustment)
Total length Without repeater 100m at 12MBaud;
with Repeater up to 1000m
max. number of participants 32 Stations at every segment without repeater.
With repeater expandable to 126.
Diagnostic functions
Standard diagnostic Storage of the last 100 diagnostic in the Flash-ROM.
Extended diagnostic no possible
Combination with periphery
max. number of modules 32 in one row
max. digital 32
max. analog 16
max. inputs 152Byte 244Byte
max. outputs 152Byte 244Byte
Dimensions and Weight
Dimensions (WxHxD) in mm 40x125x120
Weight 170g
IM 353DP
To Next Page
Loading...
