4
SAFETY
The machine has to be installed in the specif place where only the autorised and trained
technician can have the access.
ATTENTION! Sharp cutter.
Install the machine on a stable and robust table.
Ground connection mandatory, so please connect the machine to a power outlet with
ground connection.
Only the plotter Graphtec CE7000-40 can be used on this machine.
ELECTRONIC AND TECHNICAL DETAILS:
Input: 100-240V~ 2.0A, 50-60Hz
Power cord: 3 x 0.75 mm2
Fuse: T3.15 A 250 V
Working temperature: -10° / +40°
Working Humidity: 15-80%
In Denmark: “Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver
forbindelse til stikproppens jord.”
In Finland: “Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan”
In Norway: “Apparatet må tilkoples jordet stikkontakt”
In Sweden: “Apparaten skall anslutas till jordat uttag”
To Next Page
Loading...