YOKO | User’s Manual
Disable joysticks on MSF-PREPAR 3D
• From the main MFS-PREPAR 3D splash screen, choose the “Settings” option.
• Click on “Controls”.
• In the window that appears, go to the “Calibration” tab and disable the
“Enable controls” option.
• Close Microsoft Flight Simulator to ensure that changes will be saved.
Activation procedure of MFS-PREPAR 3D with the “Virtual Fly-Yoko” driver
• Execute the “Virtual Fly – YOKO” program.
• Check that YOKO is working by moving it and looking at the White box
with a red cross.
• Execute MFS-PREPAR 3D.
This procedure must be done every time you want to control MFS / PREPAR
3D through “Virtual Fly – YOKO” driver. It is advisable to create a shortcut of
“Virtual Fly – YOKO” program on the desktop.
To Next Page
Loading...