Virtualfly YOKO - YOKO Calibration on Windows

YOKO | User’s Manual
3. YOKO CALIBRATION
ON WINDOWS
(EXAMPLE BASED ON WINDOWS 7)
• Go to control panel, “Devices and printers”.
• In the “Devices and printers”, right click on “VirtualFly-YOKO”.
• From the menu choose “Game controller settings”.
• In the Game controller window, double click on “VirtualFly” (or alterna-
tively, “BUA”).
• Choose the “settings” tab.
• Click on “Calibrate”.
• In the “Game Device Calibration Wizard”, follow the steps shown.
• Once calibration is completed, go to the “Test” tab to check the correct
operation. Leaving the control in neutral position, the cross should be
centered in the box. Check the function of the six buttons as well.
• Click on “Apply” and “OK” to exit.
For a proper operation of YOKO on Microsoft Flight Simulator (hereafter “MFS”)
- PREPAR 3D and X-PLANE, prior calibration in the “Game Controllers” section
is required.