5. HOW TO READ BACK A MEMORIZED CODE
If you have followed the automatic programming , once the search is over and the code is set,
it is useful to know it and to write it down for future reference.
1
Press the device key for the code belonging to the device that you want to read
and keep it pressed for approximately 10 seconds. Release when the device
keys light up: the device keys start flashing.
2
Press the device key again for the code belonging to the device that you want
to read and observe well the next following flashes.
3
Look at the device key for the code you want to read
The LED shows the saved 4-digit code with 4 series of brief flashes (1/2 second
pauses) (e.g. for the code “1014”: 1 flash … 10 flashes … 1 flash … 4 flashes).
6. EXTRA FUNCTIONS
Personal Settings to adjust volumes
1
Press the device key for the device for which you want to set volume
adjustment (e.g. “DTT”).
2
Press the Vol+ and Vol- buttons at the same time, and keep them pressed
down:
The device keys start flashing moving towards the left from one device key to
the other.
3
Release both the Vol+ and Vol- buttons when the device key for the device on
which you want to adjust the volume lights up. (e.g. if you release when the TV
key lights up, the volume will be adjusted by the TV saved, directly pressing the
Vol+/Vol- buttons, while the remote control continues to function with the DTT
player).
The device key for the device you are controlling will light up when you press the Vol+ or Vol-
buttons when adjusting the volume.
4
www.visaelectronics.com
www.xlightvisa.it
E mail: sales@visasrl.it
CODE: 771.861
To Next Page
Loading...
