Viscount Physisplus Series User Manual

EN - 18
Quick Guide
Playing and recording of musical sequences (Sequencer)
Recording a song (RECORD mode)
In the sequencer mode video page, select the RECORD field. The display will
show the file list.
Select [NEW SONG] to start a new recording. Otherwise, a MIDI file can be
loaded to overdub it, or in other words make a new recording which will be
added to the performance already recorded.
At the bottom of the screen screen again are displayed the functions of the
buttons:
 [MENU/ENTER]: starts the recording.
 [EXIT]: quits the sequencer function.
Once recording has started, the functions change to:
 [MENU/ENTER]: pause/restart recording.
 [EXIT]: stop recording.
Press [EXIT] to end the session. The display will show the screen allowing the
recording just made to be saved.
The functions displayed allow:
 SAVE: saving of the recording as a MIDI file.
 PLAY: playback of the recoding before saving it.
 OVERDUB: creation of a new recording to be added to the sequence just
acquired.
 DISCARD AND EXIT: delete the recording and quit sequencer Record
mode.
If the SAVE field is selected, the system prompts the user to assign a name to the MIDI sequence about to be
saved.
When composing the name, use the [ ] and [ ] buttons to move the cursor and [+] and [-] to select the
character. The first three characters can only be numbers, since they are required for future expansions of the
instrument.
To confirm the name and proceed to save the data, press the [MAIN/ENTER] button; use [EXIT] to return to the
previous screen, aborting the saving operation.
The “SONG SAVED” message confirms that the file has been saved.
Play options of the sequencer (PLAY OPTIONS menu)
Select the PLAY OPTIONS field. The menu offers several options.
Function
Description
Transposer
Setting a semitone transposition on the songs played by the sequencer.
Song Loop
Select ON to automatically loop any song.
List Autoplay
Select ON to automatically play the next song when the previous is over, without pressing the
[ ] button. Only works with song lists.
List Loop
Select ON to automatically loop a song list.
NOTE
If you wish to rename .mid files saved to the USB stick using a computer, always make sure that the
names are shorter than 12 characters (either numbers or letters). In add of this please pay attention to do
not delete the first three characters and the “_”.

Viscount Physisplus Series Specifications

General

Brand	Viscount
Model	Physisplus Series
Category	Musical Instrument
Language	English