Need help?Do you have a question about the Vishay Precision Group VPG On-Board Weighing SI Onboard TruckWeigh and is the answer not in the manual?
General| Brand | Vishay Precision Group |
|---|---|
| Model | VPG On-Board Weighing SI Onboard TruckWeigh |
| Category | Scales |
| Language | English |
Overview of the TruckWeigh system installation, including its purpose and supported transducer types.
Lists and describes essential TruckWeigh components and the tools needed for installation.
Guides on mounting and positioning axle transducers on various suspension types for accurate measurements.
Details on connecting transducers, routing cables, securing excess, and installing the meter in the cab.
Overview of the TruckWeigh system setup, including its purpose and supported sensor types.
Explains the functions of the meter's LCD display and control buttons for navigation and operation.
Covers obtaining vehicle ratings, configuring junction boxes, setting axle counts, time, date, and alarms.
Details on setting slope compensation, tandem axle modes, tag axle configuration, and optional transmitters/printers.
Outlines the essential steps and prerequisites for performing a successful TruckWeigh system calibration.
Describes two methods (weigh pads or weighbridge) for accurately weighing the vehicle for calibration.
Step-by-step guide for setting axle tares, zero inclinometers, and axle span values for calibration.
Explains how to calculate and enter the axle net weight (span) values into the meter for accurate calibration.
Illustrates junction box mode settings for various axle configurations and chassis types.
Provides a comprehensive list of default settings and parameters for display, setup, and calibration.
A list of item numbers and descriptions for all components included in the TruckWeigh system.
To Next Page