vision microsystems VM1000 - 3.1 INDICATOR CARE AND MAINTENANCE

I
\.t=-..-
SECTION
3
CARE
AND MAINTENANCE
3.1 INDICATOR CARE AND MAINTENANCE
5l
The indicators require
no scheduled care or maintenance.
However,
you
probably
will
want to
clean
them occasionally.
We
recommend
the
use of
diaper flannel. NEVER
use
paper
towels
or tissues,
as
they
can have
a high abrasive content.
To
properly
clean
your
indicator, remove
surface
dust and
abrasives
by blowing
on the
indicator
face or
brushing with
a
soft bristle
brush.
Next,
'fog'
the indicator with
your
breath
and
gently
rub
the indicator.
NEVER
use any solvents
or
cleaning fluids
on
the indicators.
Should
removal
and
re-installation of
the indicator become
necessary,
you
should
always use
the same mounting screws,
as
damage
to the indicator
will
result if too long a screw is used.
Use
care
when connecting
and/or removing the rear
mounted
connectors as
the
ejector arms
can
be
broken if improperly handled.
5010002
REv F VMIOOO
OWNERS
MANUAL