Need help?Do you have a question about the Visionis VIS-8004 and is the answer not in the manual?
General| Model | VIS-8004 |
|---|---|
| Type | Receiver |
| Input Voltage | 12VDC |
| Operating Temperature | -4°F to 158°F (-20°C to 70°C) |
| Dimensions | 4.53 x 3.15 x 1.18 inches (115 x 80 x 30 mm) |
| Power Supply | 12VDC (Not Included) |
| Output Interfaces | Wiegand 26/34 |
| Weight | 0.28 lbs (0.13 kg) |
Details the receiver's output type, specified as C dry contact (NO/NC/COM).
Lists the available receiver output modes: 5 default, 4-sec momentary, 1-sec momentary, toggle, validity, latch.
Describes the 5-screw terminal connectors and ABS plastic case construction.
Covers dimensions (63x45x30mm) and weight (43g/1.52 oz).
States the product warranty is 1 Year and mentions FCC certification.
Step-by-step guide to program up to 20 transmitters, including switch presses and LED indications.
Key information on programming timeouts, already programmed remotes, and capacity.
Instructions to erase all programmed transmitters from the receiver's memory.
Details five programmable functions for the receiver, like 4-second delay and ON/OFF toggle.
Explains how to select functions using the channel function button and verify with LED flashes.
Defines LED indications for receiving signal, programming mode, successful programming, and memory deletion.
Illustrates wiring for positive and negative outputs with power sources.
Shows typical NC and NO applications for magnetic locks using 12VDC or independent power sources.
To Next Page