VT3000 INSTALLATION GUIDE
4
VT3000 Installation:
1
IMPORTANT: Degrease and clean windscreen before attaching.
After the windscreen is clean, secure the VT3000 behind the rear-view mirror,
below the windscreen tint. Place the camera as high on the windscreen as
possible, but still within the windscreen wiper area.
2
t +44 (0) 1246 225 745 | e orders@visiontrack.com | w visiontrack.com
Rear-View Mirror
Windscreen
Tint
Windscreen
Rear-View
Mirror
Windscreen
Camera Lens
DO NOT APPLY CAMERA TO TINTED WINDSCREEN SURROUND. MUST BE STUCK TO
CLEAR GLASS TO AVOID ANY GPS SIGNAL INTERFERENCE.
VT3000
Already attached to the VT3000 is a sticky adhesive pad, please use this to
secure the VT3000 onto the windscreen.
To Next Page
Loading...
