Visonic MCM-140 - Enrolling Devices in PowerMax Systems; Enrolling Arming, Disarming, Aux, and Panic Functions; Enrolling Lights, Fire, and Emergency Functions; Programming PGM;X-10 Devices

DE2461U 3
OK
(First display is READY
or NOT READY)
NEXT
NEXT
READY 00:00
USER SETTINGS
NORMAL MODE
NEXT
ENTER CODE
1. NEW INSTL CODE
NEXT
2. ENROLLING
[installer code]
OK
INSTALLER MODE






ENROLL WL DEVICE
NEXT
OK

Zone No:
Enter zone # to which you
want to enroll your 1st X-10
device, e.g. 23
NEXT
ENROLL KEYFOB
OK

Enter location # 1 to 8]
(e.g. 5)
keyfob No:
keyfob No : 5 keyfob No : 5
OK

<OFF> TO DELETE
OK


press “
*
”
key (
∼
2
sec.) until
red LED
lights)
TRANSMIT NOW
keyfob No: 5
keyfob No: 5

for next
enrolling action
NEXT
Enrolling Arming,
disarming,
Aux and Panic functions
Deleting Arming,
disarming,
Aux and Panic functions
Zone No: 23 Zone No : 23
OK

Zone No: 23
Enrolling LIGHTS, FIRE &
EMERGENCY functions

for next
enrolling action
NEXT
<OFF> TO DELETE
OK


press LIGHT
key
followed by
“1” (for X-10
device #1)
TRANSMIT NOW
Zone No: 23
Black rectangle
means that
that it is already
enrolled.
Deleting LIGHTS, FIRE &
EMERGENCY functions
(*) (*)
(*)
(**)
If the same function is already enrolled elsewhere, the “Happy Tune” will sound twice in succession.
(**) (**)
Note: The MCM-140+ can be enrolled by using the ENROLL KEYFOB menu (to enable using it for arming, disarming, AUX and Panic functions).
The MCM-140+ can not be enrolled by using the ENROLL WL DEVICE menu.
Figure 4A – Enrolling / Deleting a MCM-140 and MCM-140+ functions in PowerMax Memory
6. ENROLLING MCM-140 / MCM-140+ in POWERMAX+ / POWERMAX PRO
/ POWERMAXCOMPLETE
To enroll all the MCM-140/MCM-140+ functions (for details, see specifications), enter the PowerMax+ / PowerMax Pro / PowerMaxComplete
Installer Mode and proceed as shown in the following illustration. To enroll the AUX, X-10, Fire and Emergency functions of the MCM-140 (sent as
PowerCode messages) each button need to be enrolled to a separate zone that has selected the required settings.
OK
(First display is READY
or NOT READY)
NEXT
NEXT
READY 00:00
USER SETTINGS
NORMAL MODE
NEXT
ENTER CODE
1. NEW INSTL CODE
NEXT
2. ENROLLING
[installer code]
OK
INSTALLER MODE






OK

ENROL WL 1WAY KP
NEXT
ENROLL WL DEVICEENROLLING TYPE
[MCM-140+ No. 1 to 8]
(e.g. 5)

1way kp No :
NEXT NEXT NEXT
ENROLL KEYFOB
Black rectangle means
that the MCM-140+ No. 5
is already enrolled.
(PowerMax Pro &
PowerMaxComplete
only)
NEXT

NEXT
ENROL WL 2WAY KP
NEXT
ENROL WL SIREN ENROL PROX TAG
1way kp No : 5
OK

1way kp No: 5
Enrolling a
wireless
Commander
MCM-140+

for next
enrolling action
NEXT
press “*”
key until
red LED
lights

TRANSMIT NOW
1way kp No : 5
<OFF> TO DELETE
OK


1way kp No: 5
Deleteing a
wireless
Commander
MCM-140+
Figure 4B – Enrolling/Deleting a MCM-140 and MCM-140+ in PowerMax+ / PowerMax Pro / PowerMaxComplete Memory
Note: The PowerMax+ buttons
NEXT
&
OK
are represented in PowerMax Pro and PowerMaxCompletre by & , buttons, respectively.
7. OPERATION
The following table describes how to activate the various functions.
Function Actions
Arming HOME
(1)
Arming AWAY
Disarming
X-10 device (1-7) ON
X-10 device (1-7) OFF
LIGHT
OFF
PGM output ON
LIGHT
[8]
PGM output OFF
OFF
LIGHT
[8]
AUX Function
(≈ 2 sec.)
(2)
Emergency alarm
(≈ 2 sec.)
(6)
Fire alarm
(≈ 2 sec.)
(6)
Panic alarm
(≈ 2 sec.)
(6)
Latchkey arming
....
(3)
Quick arm / HOME
( ≈ 2 sec.). (LED blinks, then
lights RED during transmission)