D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide 21
2.3 PowerMaster-30 Installation
Required tool: Philips screwdriver #2.
PowerMaster-30 mounting process is shown in figure 3.13 - 3.23.
2.3.1 Opening the PowerMaster-30 Control Panel and Bracket Mounting
Figure 3.13 – Back Unit Mounting
To Mount the Unit: A. Mounting surface
1. Release the screws B. Back unit
2. Remove the front cover
3. Mark 4 drilling points on the mounting surface
4. Drill 4 holes and insert wall anchors
5. Fasten the back unit with 4 screws
To Next Page
Loading...
