9 HOMEDEPOT.COM
Please contact 1-855-847-7264 for further assistance.
Door Reversal Instructions (continued)
5
Reattaching the Triangular
Bracket and Door to Right Side
□ Place the top bracket into the door, and align
the metal bracket holes over the holes in the
top of the unit cabinet.
□ Tighten the three screws (4) to hold it in place.
IMPORTANT: The rubber gasket should be
compressed on all sides of the door. If the gasket
is more compressed on one side, the metal bracket
position should be adjusted.
IMPORTANT: Make sure the door is level.
□ Once the door position is nalized, securely
tighten the screws (4).
□ Reinstall the triangular bracket cover (2) by
carefully threading it onto the metal bracket (3)
and pressing down.
□ Reinstall all plastic hole insert plugs (1).
IMPORTANT: The plastic hole insert plugs
maintain the seal and integrity of the insulation.
Extra inserts are included in case the plugs are
damaged during removal.
IMPORTANT: It is extremely important to wait
at least six hours before plugging the beverage
cooler into a power outlet. During the door reversal
process, the refrigerant and compressor oil uids
mixed. It is important to allow the refrigerant
and compressor oil to separate and settle so the
compressor operates properly. Failure to do so will
cause severe mechanical problems, perhaps even
the destruction of the unit’s motor/compressor, and
will void the warranty.
1
To Next Page
Loading...
Need help?
General