Infotainment System
© 2019 Visteon Corporation Infotainment System www.visteon.com
the Phone icon on the
infotainment display will
show the Connect Phone
option in Phone Setting.
Touch this option to connect.
Another way to connect is to
touch the Settings icon and
then the Phone tab.
Up to 5 devices can be
paired to the Bluetooth
system.
Pairing only needs to be
completed once, unless the
pairing information on the
cell phone changes or the cell
phone is deleted from the
system.
If multiple paired mobile
phones are within range of
the system, the system will
connect to the last connected
mobile phone.
c. Pairing a Phone
Make sure Bluetooth has
been enabled on the cell
phone before the pairing
process is started.
Touch the Phone icon on
the Home screen or the
Phone tab on the Settings
menu.
Touch Add Device and
then scan for available
devices in the vicinity.
Select the Smart Car´s
name shown on the
infotainment display from
your cell phone’s Bluetooth
Settings list.
Follow the instructions on
the cell phone to confirm the
six-digit code showing on the
infotainment display and
touch Pair. The code on the
cell phone and infotainment
display will need to be
acknowledged for a
successful pair.
Start the pairing process
on the cell phone to be
paired to the vehicle. Once
the cell phone is paired, it will
show under Device List.
If the vehicle name does
not appear on your cell
phone, there are a few ways
to start the pairing process
over:
- Turn the cell phone off and
then back on.
- Go back to the beginning of
the Phone menus on the
infotainment display and
restart the pairing process.
- Reset the cell phone, but
this step should be done as a
last effort
Repeat above steps to pair
additional cell phones.
Wireless variant supports
pairing of Android/ iPhone
device over Wi Fi. While
pairing process, infotainment
will display appropriate
popup to user. Based on the
user selection Android/
iPhone device will be
connected over Wi Fi to use
Android Auto/ Apple CarPlay
projection technology.
To Next Page
Loading...