VisualSonics Vevo 3100 - Transducer Storage Guidelines

PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100
imaging system and MX series transducers Rev 1.0
Page 5 of 6
Disinfectant
Active Ingredient
Anios Wipes
Quaternary Ammonium, Isopropyl Alcohol
Aniosyme DD1 (5%)
Quaternary Ammonium
Endosporine
Glutaraldehyde
Hydrogen Peroxide (3%)
Hydrogen Peroxide
Asepti Steryl
Orthophenylphenol, Para-tertiary Amylphenol, Ethanol
Clidox
Chlorine Dioxide
To store a transducer
 The transducer may be stored in one of the holders along the sides of the Vevo 3100 Imaging
System with the nose pointing upward.
 Always ensure that the cable is not twisted when storing the transducer.
 Always use the supplied packaging to transport the transducer from one site to another.
Follow these guidelines when you store the transducer in the supplied packaging:
 Make sure that the transducer is clean and dry before you place it in the supplied packaging.
 Place the transducer in the supplied packaging carefully to prevent kinking of the cable.
 Avoid storing the transducer in areas of extreme temperatures or in direct sunlight.
 Store the transducer separately from other instruments to avoid inadvertent damage.