To Next PageTo Next Page
Need help?Do you have a question about the vita YZ Series and is the answer not in the manual?
General| Brand | VITA |
|---|---|
| Category | Dental equipment |
| Series | YZ |
| Material | Yttria-stabilized zirconia (Y-TZP) |
| Bending Strength | 1200 MPa |
| Thermal Expansion Coefficient | 10.5 x 10⁻⁶ K⁻¹ (25 – 500 °C) |
Details on indications for VITA YZ T, HT, ST, and XT dental materials.
Lists contraindications for VITA YZ T, HT, ST, and XT dental materials.
Specifies minimum wall thickness and connector cross-sections for restorations.
Guidance on the CAD process for milling dental restorations.
Explains the necessary enlargement factor for milling due to material shrinkage.
Information on milling VITA YZ materials with validated CAD/CAM systems.
Guidelines for reworking milled dental restorations without sinter support.
Details on polishing, staining, veneering, and press-over techniques.
Information on luting VITA YZ SOLUTIONS with conventional, self-adhesive, or adhesive methods.
Instructions for sintering VITA YZ materials in high-temperature furnaces.
Basic factors to observe when reworking sintered ceramic frameworks.
Guidelines for storing VITA YZ materials in a dry, dark, and protected place.
States VITA Zahnfabrik's certification and product markings.
Lists VITA YZ T, HT, ST, and XT products with CE marking.
