TROUBLESHOOTING
No Indicator light during
cooking process
Check power plug from cooker end to outlet to ensure complete
contact.
BATTERY
The battery will charge when the power cord is plugged in. When
charging is finished the clock will show the time on the LCD display
for many hours.
When the power cord is unplugged, the battery eventually will drain
over time and recharge the next time when machine is plugged back in
for use.
EXCEEDING THE
TEMPERATURE
“E3”
If you forget to fill the cooker with water, or add too much rice and the
expanded rice kernels fall on the heated surface during operation, it
may be overheated:
• An “E3” error message will show on the LCD display panel
• A “beeping” noise will sound, and
• The machine will shut down automatically.
Action:
• Press the WARM/CANCEL function key (4) to cancel
operation.
• Remove the inner pot from the cooker to find the cause of the
overheating.
BROKEN OR
DAMAGED UNIT
“E1”
“E2”
DO NOT TRY TO REPAIR THE UNIT BY YOURSELF
When “E1” or “E2” is displayed on the LCD display panel or a black
screen is showing, immediately turn off the power. Call warranty
service center for assistance.
11
To Next Page
Loading...