Vitalograph In2itive 2120 - TECHNICAL SPECIFICATIONS

Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 37 of 45 DT_0006-6
T ECHNICAL S PECIFICATIONS
Product Vitalograph In2itive
Model 2120
Flow detection principle Fleisch type pneumotachograph
Back pressure Less than 0.1kPa/L/second @
14L/s, complies with ATS/ERS 2005
Volume detection Flow integration sampling @ 100Hz
Maximum test duration 90 seconds
Maximum displayed volume 10 L
Volume accuracy
Better than ±3%
Linearity
Better than ±3%
Voltage/Frequency 110-250 V; approximately 50/60 Hz
Accuracy when operated in
operating temperature range
conditions
Flow ±10%
Max. flow rate ±16 L/s
Min. flow rate ±0.02 L/s
Operating temperature range ATS/ERS limits: 17–37ºC
Design limits: 10–40ºC
Performance standards the
Vitalograph In2itive meets or
exceeds
ATS/ERS 2005, ISO 23747:2007 &
ISO 26782 2009
Safety standards EN ISO 60601
QA/GMP standards EN ISO 23747:2007, EN ISO
26782:2009 & FDA 21CFR820
Size 160 mm x 100 mm x 45 mm
Weight 0.23 kg net
Storage Temperature 0–50ºC
Storage Relative Humidity 10%–95%
Printer PCL compatible USB printer.
Communications USB, micro SD Card, Cradle
Notes:
- All values displayed by the Vitalograph In2itive are expressed as
BTPS values.
- Take care not to block the mouthpiece with the tongue or teeth. A
‘spitting’ action or coughing will give false readings.
- Time zero is determined using the back-extrapolated method, from
the steepest part of the curve.