Vitamix TURBOBLEND TWO SPEED User Manual

8
PARTS AND FEATURES
To Lock the Lid in Place: Position lid on container with lid flaps midway
between the spout and the handle. Push the lid onto the container until it locks
in place. The lid must always be secured when processing, especially hot liquids
that may scald. Never operate the blender without checking to make sure the
lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked”
to “unlocked” position and lift out.
Automatic Overload Protection: Your Vitamix motor is designed to protect
itself from overheating. If the motor shuts off, turn off the power switch for up
to 45 minutes to reset. Reset time will be extended if high room temperatures
exist. To reduce the reset time, unplug the machine, remove the container, and
blow air into the center section of the bottom with a hair dryer on the cool
setting.
Power Cord: Your machine is equipped
with a long power cord. Store the
unused portion neatly underneath.
Bottom View / Cord Wrap: Plastic
cord retainers hold the cord securely.
There is no need to unscrew the cord
retainers to let out more cord. They are
flexible, and return to position after the
cord is lifted out.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
Front
Back

Vitamix TURBOBLEND TWO SPEED Specifications

Engine Specifications

motor power	2 peak output horsepower

Power

voltage	120 V
frequency	50/60 Hz
current	11.5 A

Weight and Dimensions

height	20.3 in. / 51, 4 cm
width	8.8 in. / 22, 4 cm
depth	9.0 in. / 22, 9 cm