fining out the folding stem.
Folding Stem Installation Instruction
1
2
3
Step 1: inserting the folding stem into the tube of the
e-bike, lock the latch of the folded stem, and then
unfold the folded part of the stem.
Step 2: aligning the stem angle, tighten the middle
bolt clockwise with a 6mm hexagonal tool, and then
lock the latch.
Step 3: If the handlebar angle is a little mis-
aligned, use two legs hold the front wheel, and
then use hands to bend the handlebar to align
with the front wheel.
P9
To Next Page
Loading...
