27
◆ Current Limit Value Setting (Option)
CUR represents current limit, which can be set in the range of 7.0-25.0 A, and the
maximum current value of the controller can be changed through UP/DOWN key.
Press the "i" key for a long time to confirm and return to the instrument setting item
selection interface. The factory default value of the instrument is 15.0 A.
◆ Boost Sensor Settings (Option)
Direction Setting of Assist Sensor
PAS stands for the booster sensor, and run-F/b is displayed on the screen. run-F
stands for the forward direction and run-b stands for the reverse direction; Through the
UP/DOWN key, press the "i" key briefly to confirm and enter the sensitivity setting of
the power sensor. The factory default value of the instrument is forward.
To Next Page
Loading...
